 |
 |
 |
Southwestern TRAK 24x60 Lathe
| Height of centers | 12" |
| Distance between centers | 60" |
| Swing over bed | 24" |
| Swing over saddle wings | 24" |
| Swing over cross slide | 14.5" |
| Cross slide travel | 12.5" |
| Tool section max. | 11" |
| Coolant capacity | 11 gallons |
| Bed width | 15.75" |
| Bed height | 12.6" |
| Spindle nose | D1-8 |
| Spindle through hole | 4" |
| Spindle taper | MT8 |
| Taper in reduction sleeve | MT5 |
| Spindle speeds | 2 |
| Spindle speed range | 40-678 rpm, 100-1800 rpm |
| Spindle motor | 15 HP, 220V |
| Tailstock quill speeds | 2 |
| Tailstock quill travel | 6.88" |
| Quill diameter | 3" |
| Quill taper | MT5 |
| Coolant pump motor | 1/8 HP |
| Control motor | 110V, 1Ph, 15A |
| Machine motor | 220V, 3Ph, 60Hz |
| Machine size | 112"x52"x62" |
| Machine weight | 7300 lbs |
| Includes: C-multifix toolpost, 12" 3-jaw chuck, 16" 4-jaw chuck with reversable jaw. | |
| Back | Home |