Kingston HL2000
21x60 Toolroom Lathe
| Swing over bed | 24" | |
| Swing over cross slide | 16.5" | |
| Height from floor to work center | 46.75" | |
| Max. distance between centers | 80" | |
| Hole through spindle | 3 1/8" | |
| Taper hole in center adaptor | ASA 450x MT5 | |
| Spindle nose | D1-8 Camlock | |
| Number of speed changes | 12 | |
| Range of spindle speeds | 25-1500 rpm | |
| Number of offeed changes | 76 | |
| Range of feeds per revolution Longitudinal |
0.036-1.420 ipm | |
| Cross | 1/2 of longitudinal feeds | |
| Leadscrew diameter and TPI | 1.5/16" (34) P=6mm or 4TPI | |
| Threading Range | Whitworth | 4-56 TPI (40) |
| Metric | 0.5-7 mm (20) | |
| Module | 0.5-7 M (20) | |
| DP | 4-56 DP (19) | |
| Compound rest tool slide travel | 4.31" | |
| Cross slide travel | 14.19" | |
| Spindle travel | 5.88" | |
| Tailstock center | MT4 | |
| Width of bed | 14.5" | |
| Motor | 10 HP | |
| Floor space required | 159"x 38" | |
| Net weight | 6540 lbs | |
| Back | Home |