VDF 1200
| Table size | 48"x24" |
T-slot (nose x width x |
5x18x100 |
| Maximum table load | 2646 lbs |
| Spindle center to column guideway | 26" |
| Spindle nose to table | 4-30" |
| X/Y/Z travel | 47"/24"/27" |
| X/Y/Z guideway type | Box way Y-axis 4 guideways |
| X/Y/Z rapid traverse | 0.80/0.80/0.71 ipm |
| Feedrate | 0.0394-394 ipm |
| X/Y/Z servomotor torque | 22/22/22 Nm |
| Spindle motor power | 15/20 HP |
| Spindle speed | 45-6000 rpm |
| Spindle taper | 150-50 |
| Tool magazine capacity | 24 |
| Tool magazine type | Twin arm |
| Tool adaptor type | 50 |
| Maximum tool weight | 33 lbs |
| Maximum tool diameter/length | 5"/12" |
| Tool change (tool to tool) | 4.5 seconds |
| Air pressure required | 0.69 Mpa |
| Power required | 35 kVA |
| Size | 114"x111"x110" |
| Net weight | 18739 lbs |
| CNC type | FANUC 0i-MC |
| Includes: Swarf flushing system, 24 ATC twin arm, Spindle head coolingt system, spindle taper cleaning air blast, auger chip removal, foundation screws and pads, heat exchanger, tool kit, rigid tapping, twin internal lighting. | |
| Back | Home |